How to Make a DIY PVC Pipe Gazebo

When summer comes, everywhere feels hot. If you want to spend the day outdoor, the sun makes us feel so hot. However, you should not worry because you can make a gazebo near your house. For example, you can use your backyard or front yard. You should not buy many materials with high prices because you can use your old PVC pipe for it. PVC pipe gazebo becomes a very creative idea for your yard. So, if you are interested in it, you need to pay attention to the following guides.

What You Need to Prepare

If you want to make DIY PVC pipe gazebo, you need to prepare many things.

  • The first is 2 PVC pipes in 2 meter length.
  • 2 PVC pipes in 3 meter length
  • an ABS pipe in 3 meters.
  • 4 L-shaped pipe fittings.
  • 4 T-shaped pipe fittings.
  • Masking tape.
  • Curtains
  • Rust-Oleum metallic spray paint. (optional)

You can prepare it all with small cost.

 

Tools Required for PVC Pipe Gazebo

After you prepare those things above, you also need to prepare some tools required. The first tool needed is spade. Besides that, you also need hacksaw. Then, you should also prepare tape measure & pencil. Do not forget to prepare spirit level. Lastly, gazebo from PVC pipes also requires you prepare 2 ladders. With those things and tools above, you can start making this gazebo.

How to Make It

After everything is prepared, you need to know how to make it. You need to have a good skill. However, everyone can follow these steps below. If you want to make a PVC pipe gazebo, you can start from the frame that stands in 2 x 3 meters. After that, cut 2 PVC pipes into 2 of 2 meter long pieces. Then, leave 2 pipes of 3 meter long for the length. Next, assemble the rectangular frame top, insert the T-shaped fitting on the corner and then cut 4 four centimeter length of PVC pipe as the connectors between T and L joints. Next, slip one of them into the end of each L-shaped fitting and also fit it into the T fitting open end. Lastly, aim it down to the ground.

assemble the rectangular frame top

assemble the rectangular frame top

Tips in Making PVC Pipe Gazebo

There are some tips that you need to follow when making a DIY gazebo from PVC pipes. Firstly, use grit sandpaper fine to medium to sand cut pipe ends for a snug fit. After that, remove the dust and then you should wiggle the fittings on the ends. The second tip is to soften the extra hard ground such as clay soil and then start digging the hole. After that, fill it using water. Next, let it soak in the night until morning and you can start digging again.

dig foundation holes for making a pve gazebo

dig foundation holes for making a pve gazebo

The next tip is to slip legs into the pipe sleeves. It functions to hold them upright so that you can paint them easily and well. You should do it rightly and consider many things including if you want to use curtains. Lastly, if you want to make a permanent gazebo, you can use PVC weld adhesive for all joints. That is all how to make DIY gazebo using PVC pipes. It is easy, is not it?. Read also tips and ideas before making your own gazebo.

slip legs into the pipe sleeves

slip legs into the pipe sleeves

add curtains and decor your pvc pipe gazebo

add curtains and decor your pvc pipe gazebo

By the guides above, now we can use PVC pipes to make a gazebo. So, you can enjoy your summer outdoor comfortably. Now, it is your turn to practice the steps above. Do not forget to follow the tips for the best result. Hopefully this will be a good reference for you who want to make a PVC pipe gazebo.

gazebo from pvc pipe

gazebo from pvc pipe

gazebo made pvc pipe

gazebo made pvc pipe

make gazebo pvc pipe

make gazebo pvc pipe

PVC pipe gazebo can be made by your own. However, you need to prepare many things & tools, follow the steps rightly and consider some important tips. If you dont wanna to make it by yourself, you can buy waterproof pergola rain cover

Leave a Reply

Your email address will not be published. Required fields are marked *